Our installed starting prices
These are Kora’s starting prices, not a claim about what every installer in Pennsylvania charges. Most homes we quote fall around $3,000–$4,000 installed, including the drinking-water RO system. We give you one price after the free test; financing is available.
The city setup combines softening resin and coconut-shell carbon in one tank, with a metered valve and a separate under-sink RO. The well setup separates the softener from the iron/odor filter. Bigger households, unusually high iron or low pH may need different equipment.
| Setup | Starting installed price | What it covers |
|---|---|---|
| Single-tank city water | About $3,000 | Softening + carbon + 5-stage RO |
| Dual-tank well water | About $4,000 | Separate softener and well filter + RO |
| RO only | About $700 | Under-sink drinking water system |
What actually changes the price?
Hardness and household size determine how much softening capacity you need. Your peak water demand matters too: a large household may benefit from separate softening and carbon tanks rather than one combination tank.
Well water brings other questions. Iron, manganese, sulfur odor and low pH do not all need the same fix. A high-iron well may need a different oxidation system; acidic water may need a neutralizer. We explain each extra stage rather than treating it as automatic.
Plumbing also matters. Access to the main water line, a drain, available space and the route to the drinking faucet affect the installation. A good quote says what is included and flags any unusual work before you agree.
DIY equipment versus a finished installation
A shelf price for a softener is not the same as an installed system price. With DIY, you are responsible for sizing, bypass plumbing, drain routing, local requirements, programming and troubleshooting. Add those costs before comparing quotes.
DIY can make sense for someone comfortable with plumbing and willing to handle service. A professional installation buys a correctly matched setup, a working system and someone to call if something is not right. Ask who handles labor and what the warranty actually covers.
The costs after installation
A typical Kora softener uses roughly one 40–50 lb bag of salt each month, usually $6–$9 a bag. That is about $72–$108 a year at that usage; hardness, water use and settings can change it. Salt is for the softener—not the backwashing iron filter.
RO pre- and post-filters are changed yearly; the membrane is normally changed every 2–3 years. Filter pricing depends on the installed model, so ask for its replacement schedule and price rather than relying on a generic estimate. Iron-bearing well systems also need resin cleaner every 3–6 months.
Before we leave, we walk through the system and demonstrate adding salt. Keep that maintenance schedule with your quote so the ongoing work is clear.
Red flags worth slowing down for
A large quote is not automatically wrong, but it should be explainable. If someone quotes $8,000 or more, ask what measured condition or plumbing work justifies the difference, then get another opinion.
- Rental contracts: understand the total cost, cancellation terms and who owns the equipment.
- Pressure to sign today: a water decision should survive a night to think about it.
- No water test: do not buy a treatment stage without knowing what it is meant to address.
- Vague “everything removed” promises: ask for model-specific evidence and written limitations.
- A quote with no maintenance or warranty detail: get those in writing.
What happens when Kora installs it?
Most installations take 2–4 hours, with an adult at home and the water off for part of the work. We finish with a walkthrough. For most installs there is no up-front money; you pay after the work is complete.
Our warranty is lifetime on tanks and dry non-electronic parts, five years on the valve, circuit board and media, and one year on labor and RO. If you only need better drinking water, we will say so—an RO-only system may be enough.