Two units, the same minerals
Hardness mainly measures calcium and magnesium. Utilities often report it as milligrams per liter (mg/L) as calcium carbonate, while softener settings use grains per gallon (gpg). Divide mg/L by 17.1 to convert to gpg; the figures below are rounded to one decimal.
USGS classifies water as soft at 0–60 mg/L, moderately hard at 61–120, hard at 121–180, and very hard above 180 mg/L. That is a general classification—not an equipment recommendation on its own.
Published utility hardness near us
These are supply-specific report figures. They are not a guarantee of the reading at every kitchen tap. Phoenixville’s figure comes from PA American Water’s buyer system, not the Borough report; Audubon is a separate supply from Collegeville-Trappe.
| Supply / area | Hardness | Grains per gallon |
|---|---|---|
| Douglassville / Amity · Glen Alsace | 272 mg/L | 15.9 |
| Royersford system | 155 mg/L | 9.1 |
| Phoenixville-area buyer system | 151 mg/L | 8.8 |
| Audubon system | 149 mg/L | 8.7 |
Private-well medians are context, not city-water results
The Penn State homeowner-submitted well and spring sample set gives regional context: Montgomery County’s median is 188 mg/L (11.0 gpg), Chester’s is 82 mg/L (4.8 gpg), and Berks’ is 62 mg/L (3.6 gpg). These medians describe the submitted samples—not every well in a county.
They also do not fill in missing municipal hardness. If your utility has not published a number, we say “not published” and measure your tap. A county well median is not a reading for Pottstown Borough or Aqua West Chester.
| County private-well samples | Median mg/L | Median gpg |
|---|---|---|
| Montgomery | 188 | 11.0 |
| Chester | 82 | 4.8 |
| Berks | 62 | 3.6 |
| Bucks | 145.9 | 8.5 |
| Lehigh | 104.2 | 6.1 |
What hardness feels like around the house
White buildup on faucets, spots on shower glass and soap that seems difficult to rinse can point to hard water. A softener removes hardness minerals; carbon filtration does not do that job.
Hardness alone does not tell you whether water is safe to drink. It also does not identify iron, bacteria or PFAS. On a private well, check the other symptoms rather than assuming a softener will solve everything.
Choose equipment after a tap test
We measure hardness at the house and consider water use, household size and peak demand. That lets us size the softener and set its regeneration properly.
If the water is already soft and the issue is chlorine taste, carbon or an under-sink drinking-water filter may be enough. A free in-home Kora test checks hardness, iron, pH, TDS and chlorine; it is not a state-certified laboratory test.